1 of 100

Datablocks

A list of every datablock in the game, their fields and if you're lucky, what they do!

Datablocks are groups of fields that form all the customizable parts of rundowns, weapons, enemies, levels, waves, and more. Everything needed to create a custom rundown can be created utilizing datablocks. This reference will explain all of the fields within each datablock. Check out the guides for more information about how to use them.

Prerequisites

To work with datablocks, you should be familiar with JSON.

Datablocks Storage

Datablocks and their change history is kept on GitHub.

Common Fields

All datablocks share 3 main fields, each of them has special meaning.

persistentID - UInt32

The ID of the block, used to reference by all other blocks. If you see any other field with type UInt32, chances are it's a reference to some other block (but that type is also used to reference wwise audio IDs).

Must be unique.

Although persistentID type is UInt32, the actual value range is often much smaller because it is changed to other types in networking for example. Sticking to a safe range of 1-65535 is recommended, but datablocks with even smaller ranges do exist (SurvivalWaveSettings for example). If we notice any blocks with a range smaller than that, we will make a note about it in the relevant reference page.

internalEnabled - Boolean

Whether this block is enabled. Disabled blocks are ignored by the game.

name - String

The name of the block. This seems to be only for readability and is not used by the game, but it may be used by mods.

Must be unique.

Additional Fields

Headers

This field is only used by devs in their editor.

LastPersistentID - UInt32

The last persistentID found in datablocks. Serves no purpose but can clutter the logs if not set correctly.

Types

in all datablocks documentation, you see a specific format of fields: name - type or name - type (special meaning)

The name is just that, the name of the field. The type is what data should be specified there.

These are the most basic types:

UInt32 - whole number from 0 to 4,294,967,295
Int32 - integer from -2,147,483,648 to 2,147,483,647
Single (aka float) - approximate real number of varying precision with values ranging from negative 3.402823e38 to positive 3.402823e38.
Boolean - data type with 2 values - "true" and "false".
String - plain text.

Enumerator/Enum

Enums are a special type, representing named values. Here's an example (eEnemyZoneDistribution):

None - 0
Force_One - 1
Rel_Value - 2

The underlying enum type here is Int32, and it has 3 named values. Enums usually have this underlying type, start from 0, and move up in sequence, but there are exceptions. You can check out the enum types page to see all enums.

In JSON, enums can be specified both as underlying type and as plain text.

There are special cases where the enum values are combined, e.g. EnemyMovementDataBlock AnimationControllers, type AnimatorControllerHandleName.

An example value you could see here is "EnemyRunner, EnemyLow, EnemyCrawl", or 84. This combines 3 values and the game processes it in a way that understands the value set as all 3.

Nested type/Class/Object

In datablocks reference, nested type refers to a class that's defined by the game. Each nested type has its own page to reduce clutter when the same type is referenced several times.

In JSON, these are all objects, starting and ending with curly braces { }.

Every datablock file defines one object containing several fields, including a list of objects - Blocks.

List/Array and Dictionary

All 3 of these never go by themselves, they contain other types (and sometimes can be nested).

Lists and Arrays always start and end with [ ] symbols. For example, a "List Int32" looks like this: [ 1, 2, 3 ] instead of a plain Int32 value 1. a "List List Int32" follows the same principle: [ [ 1, 2, 3 ], [ 1, 2, 3 ] ]. Arrays look exactly the same as Lists in JSON.

Dictionaries are a more complex type and are rarely found in datablocks. A dictionary is an object that maps 2 types, the first as key, the 2nd as value. In JSON, dictionaries look the same as nested objects.

Here you can see a dictionary with 2 keys "Glue" and "Explosive" mapped to objects. In JSON, an object with 2 fields "Glue" and "Explosive" could look exactly the same.

Empty values

Sometimes you see fields set to seemingly invalid values such as an empty string or -1, or just not there at all. In these cases you can think of the fields as unset, which means the game provides some default value or behaviour for it.

Additional notes

Vector

In datablocks, Vectors are messed up right now and generate with some fields that don't actually do anything:

You can ignore or delete these.

Time fields

Fields related to time/length/duration are specified in seconds unless stated otherwise.

Main

List of most commonly used datablocks

Archetype

GameData_ArchetypeDataBlock_bin.json (filled)

Defines weapon stats and metadata, including sentries.

This datablock is not referenced directly, but rather selected from PlayerOfflineGearDataBlock component firemode paired with specified component gear category from GearCategoryDataBlock. Sentry archetypes are hardcoded.

Fields

PublicName - LocalizedText (nested type)

Weapons technically have 2 names. This is the one used as a more generic name, e.g. "Assault Rifle".

The other name is specified in GearJSON in PlayerOfflineGearDataBlock.

Description - LocalizedText (nested type)

Weapon description displayed in lobby.

FireMode - eWeaponFireMode (enum)

Firing mode of this weapon. Can affect which other fields are used.

SemiBurst is an unused but functional firemode. It's basically a semi auto where you can fire x shots before triggering a cooldown, unless your delay between any 2 shots is big enough for it to reset.

RecoilDataID - UInt32 (RecoilDataBlock)

Recoil data ID of this weapon.

DamageBoosterEffect - AgentModifier (enum)

Which booster types should affect this weapon.

Seems functional but currently unused.

Damage - Single

Base damage of this weapon.

DamageFalloff - Vector2

Linear damage falloff for this weapon.

X determines where it starts, Y determines where it ends.

Anywhere in-between X and Y the damage falls off linearly via a multiplier to 0, but there's a lowest value for the multiplier.

Lowest value for the multiplier is currently 0.1.

StaggerDamageMulti - Single

Stagger damage multiplier for base damage.

PrecisionDamageMulti - Single

Precision damage multiplier for base damage. This multiplier is only applied when a weakspot is hit (back damage doesn't count).

DefaultClipSize - Int32

Default mag size.

GearMagPartDataBlock can affect this.

DefaultReloadTime - Single

Time in seconds for the reload animation to complete. Note that reload can be completed before the animation is done.

GearMagPartDataBlock can affect this.

CostOfBullet - Single

Used together with PlayerDataBlock Ammo values to several weapon ammo values. For example for a weapon with a cost of 10 and these (currently game default) ammo values:

  "AmmoStandardInitial": 300,
  "AmmoStandardInitialOnDropin": 200,
  "AmmoStandardMaxCap": 460,
  "AmmoStandardResourcePackMaxCap": 450,

We will have:

30 initial (mag included) ammo when starting a level.
OnDropin seems unused.
46 max reserve ammo.
450 * 0.2 / 10 = 9 bullets per refill (0.2 comes from the fact that you use 0.2 of a refill at any given time (e.g. 4 uses of a refill is 0.8)

Note that for sentries there's another multiplier in ItemDataBlock called ClassAmmoCostFactor.

ShotDelay - Single

Time in seconds between shots.

Sentries don't immediately detect that an enemy died so they're more likely to waste ammo on dead enemies with low delay.

ShellCasingSize - Single

Shell casing size multiplier.

ShellCasingSpeedRange - Vector2

Shell casing ejection speed range.

PiercingBullets - Boolean

Whether this weapon can pierce.

Pierce is currently broken for sentries.

PiercingDamageCountLimit - Int32

How many enemies can a piercing bullet hit. 1 means it will not pierce.

5 is technically max, although in a roundabout way - for piercing weapons, a loop is performed a maximum of 5 times before exiting. Each collider hit consumes one iteration. It can often happen that the same enemy is hit several times (although damage is applied only once), making high pierce give diminishing returns. In practice, even with 4-5 pierce you'll most likely only hit up to 3 enemies.

HipFireSpread - Single

Hipfire random spread.

Spread is hard to judge, but a weapon with 1 spread is fairly accurate even at mid-long range (~15m).

Behind the scenes this is just a multiplier for a random point inside a unit circle.

AimSpread - Single

ADS random spread.

EquipTransitionTime - Single

How long equip animation takes. Also affects when it can be fired after selecting.

EquipSequence - List WeaponAnimSequenceItem (nested type)

Animation sequence to play when equipping a weapon.

AimTransitionTime - Single

How long ADS animation takes.

AimSequence - List WeaponAnimSequenceItem (nested type)

Animation sequence to play when aiming with a weapon.

BurstDelay - Single

For burst weapons, delay between separate bursts.

BurstShotCount - Int32

For burst weapons, how many shots a single burst fires.

ShotgunBulletCount - Int32

For shotguns, pellet count in a shot.

ShotgunConeSize - Int32

For shotguns, the cone size. Note that this value is Int32, only accepting whole numbers.

Cone size affects pellet spread, but it is not random. It fires one pellet in the middle and the rest in a circle around the middle based on a sin/cos function.

ShotgunBulletSpread - Int32

Shotgun random pellet spread. Also a whole number.

This doesn't scale well with cone size and can result in shots going way further from the middle than expected.

SpecialChargetupTime - Single

How long it takes for the weapon to charge before firing.

SpecialCooldownTime - Single

Delay before a weapon can charge up again when it stops firing.

Currently broken for auto weapons.

SpecialSemiBurstCountTimeout - Single

Time for semiburst weapon shot count to reset.

Sentry_StartFireDelay - Single

Delay before a sentry starts firing when detecting an enemy.

Sentry_RotationSpeed - Single

Sentry rotation speed.

Sentry_DetectionMaxRange - Single

Sentry detection max range.

Currently broken (sort of) - the noise range the sentry causes around itself directly depends on this value.

Sentry_DetectionMaxAngle - Single

Max angle to either side at which a sentry can detect enemies.

Note that sentries can only cover 180 degrees (value 90) total as they physically cannot turn around.

Sentry_FireTowardsTargetInsteadOfForward - Boolean

By default sentries shoot where their barrel is aiming, which can cause them to miss when they shouldn't.

Setting this to true will make them basically an aimbot, always shooting towards the target.

Unfortunately, the target position is also currently broken on some enemies and so they can miss even as aimbot.

Sentry_LongRangeThreshold - Single

Distance for long range boosters.

Sentry_ShortRangeThreshold - Single

Distance for short range boosters.

Sentry_LegacyEnemyDetection - Boolean

Seems to determine how sentries should target enemies.

Practical difference is unknown.

Sentry_FireTagOnly - Boolean

Should sentry only target biotracker-tagged enemies.

Sentry_PrioTag - Boolean

Should sentry prioritize targetting biotracker-tagged enemies.

Sentry_StartFireDelayTagMulti - Single

Start fire delay multiplier when targetting biotracker-tagged enemies.

Sentry_RotationSpeedTagMulti - Single

Rotation speed multiplier when targetting biotracker-tagged enemies.

Sentry_DamageTagMulti - Single

Damage multiplier when targetting biotracker-tagged enemies.

Sentry_StaggerDamageTagMulti - Single

Stagger damage multiplier when targetting biotracker-tagged enemies.

Sentry_CostOfBulletTagMulti - Single

Cost of bullet multiplier when targetting biotracker-tagged enemies.

Makes perfect sense.

Sentry_ShotDelayTagMulti - Single

Shot delay multiplier when targetting biotracker-tagged enemies.

BigPickupDistribution

GameData_BigPickupDistributionDataBlock_bin.json

No description provided.

Fields

SpawnsPerZone - Int32

No description provided.

SpawnData - List BigPickupSpawnData (nested type)

No description provided.

ChainedPuzzle

GameData_ChainedPuzzleDataBlock_bin.json (filled)

Defines Chained Puzzle settings (e.g. Security Door alarm).

Fields

PublicAlarmName - String

The Alarm name. For example, Class S Surge Alarm

TriggerAlarmOnActivate - Boolean

Whether to trigger alarm when the puzzle starts. Typically set to false for scans without an alarm and enemy wave.

However, you can set this field to true even if you don't specify the enemy wave for the puzzle via the following fields. In that case, there will still be alarm sound but no enemy waves.

SurvivalWaveSettings - UInt32 ()

Determine how the wave spawns. You set this field to make the wave either a relatively regular, surge, diminished, or ://ERROR! alarm wave.

You may take those wave settings already available in the vanilla datablocks into good use.

SurvivalWavePopulation - UInt32 ()

Determine what type(s) of enemy would spawn.

SurvivalWaveAreaDistance - Int32

How many areas away from players should enemies spawn, with 2 being the default value if left unset.

Used in R7 to prevent enemy waves spawning too far away from the scan zone.

DisableSurvivalWaveOnComplete - Boolean

Specify whether to stop the wave after Chained Puzzle Completion. Typically set to false for ://ERROR! alarm.

UseRandomPositions - Boolean

Whether to use random position for each scan. Usually set to true.

By setting this field to false, the scan position for each puzzle would be relatively static, i.e. it's not static all the time.

WantedDistanceFromStartPos - Single

As explained by the field name :)

WantedDistanceBetweenPuzzleComponents - Single

Also as explained by the field name :)

Determines the count and types of scans.

OnlyShowHUDWhenPlayerIsClose - Boolean

If set to true, the HUD won't show up if you are a certain distance (seems to be 25m) away from the scan.

Typically set to false for regular scan, and true for extraction scan.

AlarmSoundStart - UInt32

Alarm sound when the puzzle starts. Changing the sound properly may give the scan a different impression.

Usually this sound starts the alarm sound loop.

Referenced to SoundID.

AlarmSoundStop - UInt32

Alarm sound when the puzzle stop. Could use this field to set the ambient ERROR alarm sound.

Usually this sound stops the alarm sound loop. If not set correctly, the alarm sound can go on forever.

Referenced to SoundID.

ComplexResourceSet

GameData_ComplexResourceSetDataBlock_bin.json

No description provided.

Fields

ComplexType - (enum)

No description provided.

PrimareSubComplexUsed - (enum)

No description provided.

BundleName - (enum)

No description provided.

LevelGenConfig - (nested type)

No description provided.

GeomorphTiles_1x1 - (nested type)

No description provided.

RandomizeGeomorphOrder - Boolean

No description provided.

ConsumableDistribution

GameData_ConsumableDistributionDataBlock_bin.json

No description provided.

Fields

SpawnsPerZone - Int32

No description provided.

ChanceToSpawnInResourceContainer - Single

No description provided.

SpawnData - List ConsumableSpawnData (nested type)

No description provided.

Dimension

GameData_DimensionDataBlock_bin.json

No description provided.

Fields

DimensionData - (nested type)

No description provided.

EnemyBalancing

GameData_EnemyBalancingDataBlock_bin.json

No description provided.

Fields

Health - HealthData (nested type)

No description provided.

GlueTolerance - Single

No description provided.

GlueFadeOutTime - Single

No description provided.

CanBePushed - Boolean

No description provided.

ForbidTwitchHit - Boolean

No description provided.

AllowDamgeBonusFromBehind - Boolean

No description provided.

UseTentacleTunnelCheck - Boolean

No description provided.

UseVisibilityRaycastDuringTentacleAttack - Boolean

No description provided.

TentacleAttackDamageRadiusIfNoTunnelCheck - Single

No description provided.

TentacleAttackDamage - Single

No description provided.

MeleeAttackDamage - Single

No description provided.

MeleeAttackDamageCheckRadius - Single

No description provided.

TagTime - Single

No description provided.

EnemyCollisionRadius - Single

No description provided.

EnemyCollisionPlayerMovementReduction - Single

No description provided.

EnemyCollisionMinimumMoveSpeedModifier - Single

No description provided.

EnemyBehavior

GameData_EnemyBehaviorDataBlock_bin.json

No description provided.

Fields

MeleeAttackDistance - (nested type)

No description provided.

RangedAttackDistance - (nested type)

No description provided.

StrafeDistance - (nested type)

No description provided.

HowOftenToStrafe - (nested type)

No description provided.

DistanceToStrafeWithoutLOS - (nested type)

No description provided.

RushTargetDistance - Single

No description provided.

ChanceToPropagateOnDetection - Single

No description provided.

ChanceToPropagateOnDeath - Single

No description provided.

ChanceToPropagateToMastermind - Single

No description provided.

PropagationDistance - Single

No description provided.

DisableTargetPreferenceWeight - Boolean

No description provided.

IgnoreBotsTargeting - Boolean

No description provided.

IsFlyer - Boolean

No description provided.

Flyer_PathingNodeMargin - Int32

No description provided.

Flyer_Acceleration - Single

No description provided.

Flyer_Deceleration - Single

No description provided.

Flyer_SpeedMultipler - Single

No description provided.

Flyer_LightDamageForce - Single

No description provided.

Flyer_HeavyDamageForce - Single

No description provided.

Flyer_RollThreshold - Single

No description provided.

Flyer_YawThreshold - Single

No description provided.

Flyer_PitchThreshold - Single

No description provided.

Enemy

GameData_EnemyDataBlock_bin.json

No description provided.

Fields

EnemyType - eEnemyType (enum)

No description provided.

AssetBundle - AssetBundleName (enum)

No description provided.

BundleShard - AssetBundleShard (enum)

No description provided.

BasePrefabs - List String

No description provided.

ModelDatas - List ModelData (nested type)

No description provided.

DetectionDataId - UInt32 (EnemyDetectionDataBlock)

No description provided.

BehaviorDataId - UInt32 (EnemyBehaviorDataBlock)

No description provided.

MovementDataId - UInt32 (EnemyMovementDataBlock)

No description provided.

BalancingDataId - UInt32 (EnemyBalancingDataBlock)

No description provided.

SFXDataId - UInt32 (EnemySFXDataBlock)

No description provided.

ArenaDimensions - List UInt32 (DimensionDataBlock)

No description provided.

LinkedSlaveModels - List LinkedSlaveModelData (nested type)

No description provided.

InternalMaterial - MaterialType (enum)

No description provided.

isCoccoon - Boolean

No description provided.

EnemySpottedDialogId - UInt32 (PlayerDialogDataBlock)

No description provided.

AI_Abilities - List AbilityData (nested type)

No description provided.

EnemyDetection

GameData_EnemyDetectionDataBlock_bin.json

No description provided.

Fields

weaponDetectionDistanceMin - Single

No description provided.

weaponDetectionDistanceMax - Single

No description provided.

detectionNodeDistanceMax - Single

No description provided.

movementDetectionDistance - Single

No description provided.

detectionBuildupSpeed - Single

No description provided.

detectionCooldownSpeed - Single

No description provided.

EnemyGroup

GameData_EnemyGroupDataBlock_bin.json (filled)

This datablock is used for setting enemy spawns with a focus on randomization.

Spawning enemies is explained in EnemySpawningData.

EnemyGroup blocks 37 and 38 are used by birther and birther boss respectively. This can only be changed with mods.

Fields

Type - eEnemyGroupType (enum)

Type match of this group.

There are special types, explained in EnemySpawningData.

Difficulty - eEnemyRoleDifficulty (enum)

Difficulty match of this group.

SpawnPlacementType - eSpawnPlacementType (enum)

Defines where enemies are placed in the selected area.

MaxScore - Single

The score (or population points/cost) of this group.

ScoreInAreaPaddingMulti - Single

Multiplier for MaxScore when adding to total placed score in area.

The higher the area's score, the less likely it is to be picked for another enemy group.

RelativeWeight - Single

Relative weight of this group. Affects how likely it is to be selected when several are matched.

Roles - List EnemyGroupCompositionData (nested type)

List of roles in this group. Each role will spawn one type of enemy when this group is selected.

EnemyMovement

GameData_EnemyMovementDataBlock_bin.json

No description provided.

Fields

ForceDisableAnimator - Boolean

No description provided.

AnimationControllers - AnimatorControllerHandleName (enum)

No description provided.

MoveSlowerWhenInPlayerRoom - Boolean

No description provided.

MoveSlowerWithinTargetDistance - Single

No description provided.

GlobalAnimSpeedMulti - Single

No description provided.

PathMoveAnimSpeedMulti - Single

No description provided.

RotationLerp - Single

No description provided.

RotationLerpWhenNotMoving - Single

No description provided.

BlendIntoAttackAnim - Single

No description provided.

BlendIntoScreamAnim - Single

No description provided.

AllowMovmentBlendOutOfPathMove - Boolean

No description provided.

PathMoveAnimDampTime - Single

No description provided.

AllowClimbDownLadders - Boolean

No description provided.

LocomotionPathMove - ES_StateEnum (enum)

No description provided.

LocomotionHitReact - ES_StateEnum (enum)

No description provided.

LocomotionDead - ES_StateEnum (enum)

No description provided.

LocomotionShooterAttack - ES_StateEnum (enum)

No description provided.

LocomotionScream - ES_StateEnum (enum)

No description provided.

EnemyPopulation

GameData_EnemyPopulationDataBlock_bin.json (filled)

This datablock is used to select enemies by EnemyGroupDataBlock through filters.

While technically you can have several population blocks, usually only the first block is used both in-game and by modders.

Spawning enemies is explained in EnemySpawningData.

Fields

RoleDatas - List EnemyRoleData (nested type)

List of enemy role entries.

EnemySFX

GameData_EnemySFXDataBlock_bin.json

No description provided.

Fields

SFX_ID_walk - UInt32

No description provided.

SFX_ID_run - UInt32

No description provided.

SFX_ID_climbLadder - UInt32

No description provided.

SFX_ID_heartbeatPulse - UInt32

No description provided.

SFX_ID_hibernateIdle - UInt32

No description provided.

hibernateIdleInterval - Vector2

No description provided.

SFX_ID_hibernateWakeUp - UInt32

No description provided.

SFX_ID_hibernateDie - UInt32

No description provided.

SFX_ID_hibernateDetectionStart - UInt32

No description provided.

SFX_ID_scream - UInt32

No description provided.

SFX_ID_stuckInGlue - UInt32

No description provided.

SFX_ID_releaseFromGlue - UInt32

No description provided.

SFX_ID_attackWindUp - UInt32

No description provided.

SFX_ID_attackWindUp_NotLocalTarget - UInt32

No description provided.

SFX_ID_attackFire - UInt32

No description provided.

SFX_ID_hurtSmall - UInt32

No description provided.

SFX_ID_hurtBig - UInt32

No description provided.

SFX_ID_die - UInt32

No description provided.

SFX_ID_JumpStart - UInt32

No description provided.

SFX_ID_JumpInAir - UInt32

No description provided.

SFX_ID_JumpLand - UInt32

No description provided.

SFX_ID_BigTentacleStart - UInt32

No description provided.

SFX_ID_BigTentacleTipLoop - UInt32

No description provided.

SFX_ID_BigTentacleEnd - UInt32

No description provided.

ExpeditionBalance

GameData_ExpeditionBalanceDataBlock_bin.json

No description provided.

Fields

HealthPerZone - Single

No description provided.

DisinfectionPerZone - Single

No description provided.

WeaponAmmoPerZone - Single

No description provided.

ToolAmmoPerZone - Single

No description provided.

CommodityValuePerZone - Single

No description provided.

ChanceToPutCommodityInResourceContainer - Single

No description provided.

ChanceToPutArtifactInResourceContainer - Single

No description provided.

ChanceToSpawnCommodityLargePack - Single

No description provided.

ChanceToSpawnCommodityMediumPack - Single

No description provided.

ChanceToReUseResourceContainer - Single

No description provided.

MaxPacksPerResourceContainer - Int32

No description provided.

EmptyWeakResourceContainersPerZone - Single

No description provided.

EmptySecureResourceContainersPerZone - Single

No description provided.

LootPerZone - Single

No description provided.

AirPerZone - Single

No description provided.

AirPerZoneInNoAir - Single

No description provided.

TerminalsPerZone - Single

No description provided.

EnemyPatrolGroupsPerZone - Int32

No description provided.

StaticEnemiesMaxPerZone - Int32

No description provided.

StaticEnemiesMaxSmallArea - Int32

No description provided.

StaticEnemiesMaxMediumArea - Int32

No description provided.

StaticEnemiesMaxLargeArea - Int32

No description provided.

StaticEnemiesMaxHugeArea - Int32

No description provided.

EnemyPopulationPerZone - Single

No description provided.

VoxelCoverageAreaMultiplier - Single

No description provided.

VoxelCoverageAreaScoringRandomMultiplier - Single

No description provided.

ArtifactsPerSegment - Int32

No description provided.

ArtifactsPerLayer - Int32

No description provided.

WeakDoor4x4Health - Single

No description provided.

WeakDoor8x4Health - Single

No description provided.

WeakDoorChanceLockWeightNoLock - Single

No description provided.

WeakDoorChanceLockWeightMeleeLock - Single

No description provided.

WeakDoorChanceLockWeightHackableLock - Single

No description provided.

WeakDoorUnlockedChanceForOpen - Single

No description provided.

WeakDoorOpenChanceForWallRemoverUsed - Single

No description provided.

WeakDoorLockHealth - Single

No description provided.

WeakResourceContainerWithPackChanceForLocked - Single

No description provided.

ResourcePackSizes - List Single

No description provided.

GlueVolumeToDoorHealthConversion - Single

No description provided.

GlueVolumeForDoorGlueMaxState - Single

No description provided.

FlashlightSettings

GameData_FlashlightSettingsDataBlock_bin.json

No description provided.

Fields

range - Single

No description provided.

angle - Single

No description provided.

intensity - Single

No description provided.

color - Color

No description provided.

startupShard - AssetBundleShard (enum)

No description provided.

FogSettings

GameData_FogSettingsDataBlock_bin.json (filled)

This datablock edits fog settings, which include fog's visual effects (color, opacity, etc.), height, and controls if the fog is flipped (inversed fog, like the one in R5E1), infectious, etc.

As one of the most important features of the game, fog serves to occlude player's sight, limit zones' reachability and make decisions on whether to 'toss a Fog Repeller and combat amid' or to 'flee'. Also, colored fog (for example, Green Fog in R7C2, etc.) would affect lighting of the entire level, making your level able to give players impressions of tension, horror, anxiety, sound, and so on.

Fields

Enabled - Boolean

Unused.

FogColor - Color

Determine the color of the fog. This can affect the lighting of the entire level and create some preferable visual effect.

It seems that starting in Rundown 7, the way fog occludes sight and interacts with lights has changed. Colored fog may not block sight well, so it's best to use white fog for that purpose.

For example, here's extremely dense red fog:

FogDensity - Single

The base fog density in the entire level.

To create inversed fog (e.g. R5E1), you have to set FogDensity and DensityHeightMaxBoost such that FogDensity < DensityHeightMaxBoost

FogAmbience - Single

Unused.

DensityNoiseDirection - Vector3

Noise are those floating particles right above the fog plane. These particles make the fog plane resemble a tide.

This field controls the floating direction of those particles / tide pattern of the fog plane.

DensityNoiseSpeed - Single

Controls how fast noise particles float / how uneven the tide pattern of the fog plane is.

DensityNoiseScale - Single

Seems to be the size of the noise particles. Higher values can make them look visibly separated, kind of like dust clouds.

DensityHeightAltitude - Single

The lowest point for the fog height. For non-inversed fog, everything with altitude lower than this value would be fully submerged by the fog.

As a reference for zone altitude: Low : -4.0, Mid : 0.0, High: 4.0

DensityHeightRange - Single

Distance above lowest point for fog height, used in calculating the highest point for fog height.

DensityHeightMaxBoost - Single

This is the actual field for controlling the density of (non-inversed) fog. The larger, the more occluding.

Infection - Single

The maximum value for how fast infection accumulates from fog. For example, 0.1 would take you 10 seconds to get fully infected. 0.03 is a common, average value to set to.

Note that how much infection you get depends on how deep in the fog you are with linear scaling, where the highest point of infection (and lowest actual infection gain rate) is at DensityHeightAltitude + DensityHeightRange and lowest point is DensityHeightAltitude

GearCategory

GameData_GearCategoryDataBlock_bin.json

No description provided.

Fields

PublicName - (nested type)

No description provided.

Description - (nested type)

No description provided.

BaseItem - UInt32 ()

No description provided.

HUDIcon - String

No description provided.

IconRotationOffset - Single

No description provided.

IconZoomOffset - Single

No description provided.

FPSArmPoseName - String

No description provided.

Gear

GameData_GearDataBlock_bin.json

No description provided.

Fields

officialForRelease - Boolean

No description provided.

publicName - String

No description provided.

baseItemID - UInt32

No description provided.

weaponPersonalityID - UInt32

No description provided.

showAmmoInGUI - Boolean

No description provided.

ClassAmmoCostFactor - Single

No description provided.

PublicGearInfo - String

No description provided.

allowEmptyStructualModSlot - Boolean

No description provided.

allowEmptyVisualModSlot - Boolean

No description provided.

allowEmptyToolSlot - Boolean

No description provided.

allowEmptySightSlot - Boolean

No description provided.

allowEmptyGripSlot - Boolean

No description provided.

allowEmptyMuzzleSlot - Boolean

No description provided.

allowEmptyMagazineSlot - Boolean

No description provided.

Item

GameData_ItemDataBlock_bin.json

No description provided.

Fields

publicName - String

No description provided.

LocalizedName - LocalizedText (nested type)

No description provided.

terminalItemShortName - String

No description provided.

terminalItemLongName - String

No description provided.

addSerialNumberToName - Boolean

No description provided.

registerInTerminalSystem - Boolean

No description provided.

DimensionWarpType - ItemWarpType (enum)

No description provided.

Shard - AssetBundleShard (enum)

No description provided.

inventorySlot - InventorySlot (enum)

No description provided.

FPSSettings - UInt32 (ItemFPSSettingsDataBlock)

No description provided.

crosshair - Crosshair (enum)

No description provided.

HUDIcon - String

No description provided.

ShowCrosshairWhenAiming - Boolean

No description provided.

GUIShowAmmoClip - Boolean

No description provided.

GUIShowAmmoPack - Boolean

No description provided.

GUIShowAmmoTotalRel - Boolean

No description provided.

GUIShowAmmoInfinite - Boolean

No description provided.

canMoveQuick - Boolean

No description provided.

BlockToolAmmoRefill - Boolean

No description provided.

ClassAmmoCostFactor - Single

No description provided.

ConsumableAmmoMin - Int32

No description provided.

ConsumableAmmoMax - Int32

No description provided.

audioEventEquip - String

No description provided.

FirstPersonPrefabs - List String

No description provided.

ThirdPersonPrefabs - List String

No description provided.

PickupPrefabs - List String

No description provided.

InstancePrefabs - List String

No description provided.

EquipTransitionTime - Single

No description provided.

AimTransitionTime - Single

No description provided.

FPSArmsAnim - String

No description provided.

ThirdPersonFullbodyMovementSet - eFullbodyPlayerMovementSet (enum)

No description provided.

LeftHandGripAlign - String

No description provided.

LeftHandGripAnim - String

No description provided.

RightHandGripAlign - String

No description provided.

RightHandGripAnim - String

No description provided.

SightLookAlign - String

No description provided.

MuzzleAlign - String

No description provided.

BackpackAlign - String

No description provided.

LevelLayout

GameData_LevelLayoutDataBlock_bin.json (filled)

Level layout is the main block defining what the level looks like and what you can find in it, including resources, enemies, terminals etc.

Fields

ZoneAliasStart - Int32

The number of the first zone as seen in-game. The rest are derived from this and LocalIndex.

Zones - (nested type)

List containing the data of each zone. Each entry is one zone in the map. The first zone in the list is the entrance/elevator (NOT localindex 0).

LightSettings

GameData_LightSettingsDataBlock_bin.json

No description provided.

Fields

LightCategorySettings - (nested type)

No description provided.

MeleeAnimationSet

GameData_MeleeAnimationSetDataBlock_bin.json

Defines melee weapon animation sets alongside several timings related to them.

This datablock is referenced by a .

Fields

HoldToChargeTime - Single

Time in seconds that attack must be held for the weapon to begin charging.

MaxDamageChargeTime - Single

Time in seconds to reach full charge.

AutoAttackTime - Single

Time in seconds after starting a charge at which the weapon will automatically swing.

AutoAttackWarningTime - Single

Time in seconds after starting a charge at which a sound effect plays and causes the reticle to blink red (to warn that the automatic attack will occur soon).

FPIdleAnim - (nested type)

No description provided.

Animation for the light attack that swings from the right (e.g. the first swing).

Animation for the light attack that swings from the left (e.g. the second swing).

Animation that plays after hitting a light attack from the right.

Animation that plays after hitting a light attack from the left.

Animation for pushing. Note: Pushes cannot normally be consecutively done faster than 1.2s. However, attacks reset this cooldown and allow two consecutive pushes to be performed afterwards, separated by push's combo time.

Animation for charging an attack from the right.

Animation for charging an attack from the left.

Animation for the charge attack that swings from the right.

Animation for the charge attack that swings from the left.

Animation that plays after hitting a charge attack from the right.

Animation that plays after hitting a charge attack from the left.

No description provided.

MeleeArchetype

GameData_MeleeArchetypeDataBlock_bin.json

Defines melee weapon stats and metadata.

This datablock is not referenced directly, but instead specified by the given to a melee weapon.

Fields

PublicName - String

Datablock name. Unused elsewhere.

NoiseLevel - (enum)

Normal: Wakes up sleepers in 7m from hitting locks or the ground. Quiet: Wakes up sleepers in 4m from hitting locks or the ground. Also has reduced chance to trigger long range aggro (i.e. glowing enemy wakes up far away from killing another enemy).

ChargedAttackDamage - Single

Damage dealt by fully charged attacks. Partial charge interpolates the damage from light to fully charged by the charge progress cubed.

LightAttackDamage - Single

Damage dealt by light attacks.

LightStaggerMulti - Single

Stagger damage multiplier for light attacks.

ChargedStaggerMulti - Single

Stagger damage multiplier for fully charged attacks. Partial charge interpolates the multiplier from light to fully charged by the charge progress cubed.

LightPrecisionMulti - Single

Precision damage multiplier for light attacks.

ChargedPrecisionMulti - Single

Precision damage multiplier for fully charged attacks. Partial charge interpolates the multiplier from light to fully charged by the charge progress cubed.

LightEnvironmentMulti - Single

Environment damage multiplier for light attacks (i.e. vs. locks and doors).

ChargedEnvironmentMulti - Single

Environment damage multiplier for fully charged attacks (i.e. vs. locks and doors). Partial charge interpolates the multiplier from light to fully charged by the charge progress cubed.

LightBackstabberMulti - Single

Backstab damage multiplier for light attacks. Stacks multiplicatively with the default backstab bonus. Does not apply to enemies without the default backstab bonus.

ChargedBackstabberMulti - Single

Backstab damage multiplier for light attacks. Stacks multiplicatively with the default backstab bonus. Does not apply to enemies without the default backstab bonus. Partial charge interpolates the multiplier from light to fully charged by the charge progress cubed.

LightSleeperMulti - Single

Damage multiplier to sleeping enemies for light attacks. Does not apply to Scouts.

ChargedSleeperMulti - Single

Damage multiplier to sleeping enemies for fully charged attacks. Does not apply to Scouts. Partial charge interpolates the multiplier from light to fully charged by the charge progress cubed.

SkipLimbDestruction - Boolean

Prevents the weapon from breaking enemy limbs.

CameraDamageRayLength - Single

Distance in meters that the weapon hits what is directly in view. Does not affect the model hitbox.

AttackSphereRadius - Single

Additional distance in meters around the model hitbox that hits can occur in. Does not affect wall collision. Remains inactive while something is directly in view. Appears to be twice as large as the value written in practice.

PushDamageSphereRadius - Single

Distance in meters around the player that pushes can affect targets in.

CanHitMultipleEnemies - Boolean

Allows the weapon to hit with both the forward damage ray (hitting a target directly in view) and the model hitbox. Also allows the weapon to hit additional targets after the first hit if the hit animation can deal damage. Can still damage multiple enemies simultaneously with the model hitbox even if set to false.

EvaluateHoldBeforeAttack - Boolean

If true, waits until the attack button is released to trigger a light attack. Otherwise, immediately begins the light attack animation on mouse click, though it can still transition to a charge attack.

PlayImpactEffect - Boolean

Should cause the impact particle effect when hitting terrain.

AllowRunningWhenCharging - Boolean

Allows the user to sprint while charging. If false, will stop and prevent sprinting while charging.

PlayerRunSpeedMultiWhileCharging - Single

Multiplier to user sprint speed while charging. Cannot cause the user to exceed their sprint speed, but can increase the diagonal sprint speed to match the forward sprint speed.

Melee animation set ID of this weapon.

Melee SFX set ID of this weapon.

ChargedAttackStaminaCost - ActionCost

Stamina cost for fully charged attacks. Partial charge interpolates the multiplier from light to fully charged by the charge progress cubed.

LightAttackStaminaCost - ActionCost

Stamina cost for light attacks.

PushStaminaCost - ActionCost

Stamina cost for pushes.

Rarely Edited

List of datablocks that modders rarely edit

Unused

List of datablocks that seem to make no impact on the game

Player

GameData_PlayerDataBlock_bin.json (filled)

Defines player stats.

While this is a datablock, currently its only reference is hardcoded ID 1.

Fields

health - Single

The max health of a player.

healthRegenStartDelayAfterDamage - Single

How long it takes for health to start regenerating after taking damage.

healthRegenRelMax - Single

Relative max hp to regenerate.

E.g. 0.5 from 100 base would be 50.

healthRegenDelay - Single

Delay between health regeneration updates.

healthRegenPerSecond - Single

How much health is regenerated per second.

friendlyFireMulti - Single

Friendly fire damage multiplier.

Currently broken for tools.

fallDamageMinHeight - Single

Minimum height a player has to fall to take fall damage.

fallDamageMaxHeight - Single

Falling height where a player takes maximum fall damage.

fallDamageMin - Single

Minimum fall damage a player can take.

fallDamageMax - Single

Maximum fall damage a player can take.

Anywhere between min and max, fall damage scales linearly.

nanoswarmShieldDamageMultiplierCurve - AnimationCurve

Unknown, most likely related to the unreleased nanoswarm tool and likely to change.

nanoswarmShieldResistanceCurve - AnimationCurve

Unknown, most likely related to the unreleased nanoswarm tool and likely to change.

nanoswarmNegativeResistanceCurve - AnimationCurve

Unknown, most likely related to the unreleased nanoswarm tool and likely to change.

battery - Int32

Seems unused.

smallBatteryConsumtionPerSec - Single

Seems unused.

mediumBatteryConsumtionPerSec - Single

Seems unused.

largeBatteryConsumtionPerSec - Single

Seems unused.

walkMoveSpeed - Single

Player move speed while walking.

runMoveSpeed - Single

Player move speed when running/sprinting.

airMoveSpeed - Single

Affects move speed in the air. Seems to have little effect on slowing down and turning, mostly impacts speeding up. However, unless set to high values, makes no notable impact.

crouchMoveSpeed - Single

Player move speed while crouching.

ladderMoveSpeed - Single

Player move speed when going up and down ladders.

walkFootstepLength - Single

Only seems to have an impact on when player footstep audio is played.

runFootstepLength - Single

Only seems to have an impact on when player footstep audio is played.

crouchFootstepLength - Single

Only seems to have an impact on when player footstep audio is played.

throttleSmoothAcc - Single

Multiplier for smooth acceleration. At low values players will have trouble speeding up.

throttleSmoothStop - Single

Multiplier for smooth stopping. At low values players will have trouble stopping in place (can still reverse direction normally depending on acc value).

throttleSmoothVertical - Single

Seems to have no effect.

jumpVelInitial - Single

Initial vertical velocity gained from a jump.

jumpGravityMulDefault - Single

Gravity mults affect how fast falling accelerates (rising decelerates).

Gravity mult when rising and holding the jump button.

jumpGravityMulButtonReleased - Single

Gravity mult when rising and not holding the jump button.

jumpGravityMulAfterPeak - Single

Gravity mult after jump peak.

jumpGravityMulFalling - Single

Gravity mult when falling without jumping.

jumpVerticalVelocityMax - Single

Maximum vertical movement speed.

camPosDefault - Vector3

Default player camera position offset from player's feet.

camPosCrouch - Vector3

Player camera position offset while crouched.

camFovRunDif - Single

Added fov while player is running.

DofDefault - DOFSettingsData (nested type)

Default depth of field settings.

DofInElevator - DOFSettingsData (nested type)

Depth of field settings in elevator.

DofInTerminal - DOFSettingsData (nested type)

Depth of field settings in terminal.

ChromaticAbberationIntensityMax - Single

Seems unused.

mouselookAimScaleMinMax - Vector2

Mouselook settings are probably something you shouldn't mess with.

Seems to affect aim sensitivity when in sights.

mouselookAimScaleFovRef - Vector2

Seems to affect aim sensitivity when in sights.

FPSArmsOffset - Vector3

FPS settings are probably something you shouldn't mess with.

FPS model setting.

FPSBodyOffset - Vector3

FPS model setting.

AdditionalFPSBodyOffsetWhenRunning - Vector3

FPS model setting.

FPSBodyOffsetWhenNotFollowingCamera - Vector3

FPS model setting.

FPSBodyScale - Vector3

FPS model setting.

FPSBodyMoveNeckToFollowCamera - Boolean

FPS model setting.

FPSBodyWantedDisToNeck - Single

FPS model setting.

GearMaxSightHeightDiff - Single

Affects maximum possible height above default of sights.

AmmoStandardInitial - Int32

Ammo settings are closely tied with Archetype cost of bullet settings and explained there.

These settings are not literal bullet counts but rather a base value for calculations.

Initial standard weapon ammo when starting the level.

AmmoStandardInitialOnDropin - Int32

Seems unused.

AmmoStandardMaxCap - Int32

Max reserve ammo for standard weapons.

AmmoStandardResourcePackMaxCap - Int32

Affects how much ammo you get from a refill pack.

AmmoSpecialInitial - Int32

Initial special weapon ammo when starting the level.

AmmoSpecialInitialOnDropin - Int32

Seems unused.

AmmoSpecialMaxCap - Int32

Max reserve ammo for special weapons.

AmmoSpecialResourcePackMaxCap - Int32

Affects how much ammo you get from a refill pack.

AmmoClassInitial - Int32

Initial tool ammo.

AmmoClassInitialOnDropin - Int32

Seems unused.

AmmoClassMaxCap - Int32

Max tool ammo.

AmmoClassResourcePackMaxCap - Int32

Affects how much ammo you get from a refill pack.

There is an additional multiplier for sentries.

implantSmallTriggerDelay - Single

Seems unused.

implantBigTriggerDelay - Single

Seems unused.

itemAnimWeight - Single

The following item settings seem to be either unused or have no impact worth editing for modders, therefore they have no descriptions.

itemAnimAxisWeight - Vector3

No description provided.

itemLookatAimWeight - Single

No description provided.

itemLookSwayWeight - Single

No description provided.

itemLookSwayPosImpulseScale - Vector3

No description provided.

itemLookSwayPosStiffness - Single

No description provided.

itemLookSwayPosDamping - Single

No description provided.

itemLookSwayRotImpulseScale - Vector3

No description provided.

itemLookSwayRotXMulti - Vector2

No description provided.

itemLookSwayRotStiffness - Single

No description provided.

itemLookSwayRotDamping - Single

No description provided.

itemLookSwayWeightAiming - Single

No description provided.

itemLookSwayPosImpulseScaleAiming - Vector3

No description provided.

itemLookSwayRotImpulseScaleAiming - Vector3

No description provided.

itemAnimWeightAiming - Single

No description provided.

itemRecoilWeight - Single

No description provided.

itemFootstepWeight - Single

No description provided.

itemFootstepWeightAiming - Single

No description provided.

itemFootstepDelay - Single

No description provided.

itemFootstepImpulseScale - Vector3

No description provided.

itemFootstepStiffness - Single

No description provided.

itemFootstepDamping - Single

No description provided.

breathingEnabled - Boolean

Determines whether audible breathing from stamina and infection is enabled.

breathingStaminaEnabled - Boolean

Determines whether audible breathing from stamina is enabled.

breathingScaredEnabled - Boolean

Seems unused or unknown.

breathingDebugEnabled - Boolean

When enabled, prints some additional debug logs regarding breathing.

breathingVolume - Single

Base audible breathing sound volume.

breathingHealthLowLimit - Single

Health limit for switching to low health breathing sound.

StaminaTimeBeforeResting - Single

Time without spending stamina before player starts resting.

StaminaRegenRestingInCombat - Single

Stamina regeneration rate when resting in combat.

StaminaRegenNotRestingInCombat - Single

Stamina regeneration rate when not resting in combat.

StaminaRegenRestingOutOfCombat - Single

Stamina regeneration rate when resting out of combat.

StaminaRegenNotRestingOutOfCombat - Single

Stamina regeneration rate when not resting out of combat.

StaminaEnableAffectMoveSpeed - Boolean

Whether stamina can affect movement speed.

StaminaHighMovespeedModifier - Single

Movement speed multiplier when stamina is high.

StaminaLowMovespeedModifier - Single

Movement speed multiplier when stamina is low.

StaminaMoveSpeedCurveExponent - Single

Stamina speed modifier is a lerp between high and low with tiredness (0 - full stamina, 1 - empty stamina) as the value used to interpolate.

This value is the exponent for tiredness. Higher value means stamina will slow down players less.

StaminaEnableAffectMeleeSpeed - Boolean

Whether stamina should affect melee charge speed.

StaminaHighMeleeSpeedModifier - Single

Melee charge speed multiplier when stamina is high.

StaminaLowMeleeSpeedModifier - Single

Melee charge speed multiplier when stamina is low.

StaminaMeleeSpeedCurveExponent - Single

StaminaMoveSpeedCurveExponent equivalent for melee charge speed.

StaminaExhaustedAudioThreshold - Single

Sfx Audio threshold for stamina exhausted loop.

StaminaWasTiredAudioThreshold - Single

Threshold for setting an audio switch for playing was tired breathing audio later.

StaminaRestedAudioThreshold - Single

Stamina threshold for playing rested audio after player was tired.

StaminaUsageAffectedByDrama - Boolean

Effectively decides whether InCombat values will be used during combat.

StaminaMinimumCapWhenNotInCombat - Single

Minimum allowed stamina when not in combat.

StaminaMaximumCapWhenInCombat - Single

Maximum allowed stamina when in combat.

StaminaMaximumCapWhenInCombatFallRate - Single

How fast should stamina fall to combat maximum cap during combat.

Default 0 in base game, which means stamina will not fall unless players use it.

StaminaJumpCost - ActionCost

Jump stamina action cost.

StaminaSneakCost - ActionCost

Crouching movement stamina action cost.

StaminaWalkCost - ActionCost

Walking stamina action cost.

StaminaRunCost - ActionCost

Running/sprinting stamina action cost.

StaminaCrouchEnterCost - ActionCost

Crouch enter stamina action cost.

defaultDialogLineDelay - Single

Delay between separate dialog lines.

Dialog line fields seem mostly related to PlayerDialogDataBlock.

To our knowledge the rest of these fields are either unused or not useful for modders so most of them probably will not have useful descriptions.

shortDialogCooldown - Single

How long a short dialog is blocked after playing.

mediumDialogCooldown - Single

How long a medium dialog is blocked after playing.

longDialogCooldown - Single

How long a long dialog is blocked after playing.

radioEnabledDefaultDistance - Single

No description provided.

radioQualityLowestAtDistance - Single

No description provided.

lowTensionMaxLimit - Single

No description provided.

mediumTensionMaxLimit - Single

No description provided.

dialogEnabledInSpectator - Boolean

No description provided.

radioQualityInSpectator - Single

No description provided.

radioDistortionInSpectator - Single

No description provided.

noAirTimeToEmpty - Single

No description provided.

noAirDamageRel - Single

No description provided.

noAirDamageDelay - Single

No description provided.

Regarding ActionCost

A separate page for this struct was not generated because whoever made it is an idiot (but actually probably just a new person who doesn't know how datablocks are supposed to work).

For rundown developers, ActionCost is essentially the same thing as any other nested type.

baseStaminaCostInCombat - Single

Stamina cost of this action in combat.

baseStaminaCostOutOfCombat - Single

Stamina cost of this action out of combat.

resetRestingTimerInCombat - Boolean

Whether this action should reset resting timer in combat.

resetRestingTimerOutOfCombat - Boolean

Whether this action should reset resting timer out of combat.

WardenObjective

GameData_WardenObjectiveDataBlock_bin.json (filled)

Fields

Type - eWardenObjectiveType (enum)

No description provided.

Header - LocalizedText (nested type)

No description provided.

MainObjective - LocalizedText (nested type)

No description provided.

WardenObjectiveSpecialUpdateType - eWardenObjectiveSpecialUpdateType (enum)

No description provided.

GenericItemFromStart - UInt32 (ItemDataBlock)

No description provided.

DoNotMarkPickupItemsAsWardenObjectives - Boolean

No description provided.

FindLocationInfo - LocalizedText (nested type)

No description provided.

FindLocationInfoHelp - LocalizedText (nested type)

No description provided.

GoToZone - LocalizedText (nested type)

No description provided.

GoToZoneHelp - LocalizedText (nested type)

No description provided.

InZoneFindItem - LocalizedText (nested type)

No description provided.

InZoneFindItemHelp - LocalizedText (nested type)

No description provided.

SolveItem - LocalizedText (nested type)

No description provided.

SolveItemHelp - LocalizedText (nested type)

No description provided.

GoToWinCondition_Elevator - LocalizedText (nested type)

No description provided.

GoToWinConditionHelp_Elevator - LocalizedText (nested type)

No description provided.

GoToWinCondition_CustomGeo - LocalizedText (nested type)

No description provided.

GoToWinConditionHelp_CustomGeo - LocalizedText (nested type)

No description provided.

GoToWinCondition_ToMainLayer - LocalizedText (nested type)

No description provided.

GoToWinConditionHelp_ToMainLayer - LocalizedText (nested type)

No description provided.

ShowHelpDelay - Single

No description provided.

WavesOnElevatorLand - List GenericEnemyWaveData (nested type)

No description provided.

EventsOnElevatorLand - List WardenObjectiveEventData (nested type)

No description provided.

WaveOnElevatorWardenIntel - LocalizedText (nested type)

No description provided.

FogTransitionDataOnElevatorLand - UInt32 (FogSettingsDataBlock)

No description provided.

FogTransitionDurationOnElevatorLand - Single

No description provided.

OnActivateOnSolveItem - Boolean

No description provided.

WavesOnActivate - List GenericEnemyWaveData (nested type)

No description provided.

EventsOnActivate - List WardenObjectiveEventData (nested type)

No description provided.

StopAllWavesBeforeGotoWin - Boolean

No description provided.

WavesOnGotoWin - List GenericEnemyWaveData (nested type)

No description provided.

WaveOnGotoWinTrigger - eRetrieveExitWaveTrigger (enum)

No description provided.

EventsOnGotoWin - List WardenObjectiveEventData (nested type)

No description provided.

EventsOnGotoWinTrigger - eRetrieveExitWaveTrigger (enum)

No description provided.

FogTransitionDataOnGotoWin - UInt32 (FogSettingsDataBlock)

No description provided.

FogTransitionDurationOnGotoWin - Single

No description provided.

ChainedPuzzleToActive - UInt32 (ChainedPuzzleDataBlock)

No description provided.

ChainedPuzzleMidObjective - UInt32 (ChainedPuzzleDataBlock)

No description provided.

ChainedPuzzleAtExit - UInt32 (ChainedPuzzleDataBlock)

No description provided.

ChainedPuzzleAtExitScanSpeedMultiplier - Single

No description provided.

Gather_RequiredCount - Int32

No description provided.

Gather_ItemId - UInt32 (ItemDataBlock)

No description provided.

Gather_SpawnCount - Int32

No description provided.

Gather_MaxPerZone - Int32

No description provided.

Retrieve_Items - List UInt32 (ItemDataBlock)

No description provided.

ReactorWaves - List ReactorWaveData (nested type)

No description provided.

LightsOnFromBeginning - Boolean

No description provided.

LightsOnDuringIntro - Boolean

No description provided.

LightsOnWhenStartupComplete - Boolean

No description provided.

DoNotSolveObjectiveOnReactorComplete - Boolean

No description provided.

SpecialTerminalCommand - String

No description provided.

SpecialTerminalCommandDesc - LocalizedText (nested type)

No description provided.

PostCommandOutput - List String

No description provided.

SpecialCommandRule - TERM_CommandRule (enum)

No description provided.

PowerCellsToDistribute - Int32

No description provided.

Uplink_NumberOfVerificationRounds - Int32

No description provided.

Uplink_NumberOfTerminals - Int32

No description provided.

Uplink_WaveSpawnType - SurvivalWaveSpawnType (enum)

No description provided.

CentralPowerGenClustser_NumberOfGenerators - Int32

No description provided.

CentralPowerGenClustser_NumberOfPowerCells - Int32

No description provided.

CentralPowerGenClustser_FogDataSteps - List GeneralFogDataStep (nested type)

No description provided.

ActivateHSU_ItemFromStart - UInt32 (ItemDataBlock)

No description provided.

ActivateHSU_ItemAfterActivation - UInt32 (ItemDataBlock)

No description provided.

ActivateHSU_BringItemInElevator - Boolean

No description provided.

ActivateHSU_MarkItemInElevatorAsWardenObjective - Boolean

No description provided.

ActivateHSU_StopEnemyWavesOnActivation - Boolean

No description provided.

ActivateHSU_ObjectiveCompleteAfterInsertion - Boolean

No description provided.

ActivateHSU_RequireItemAfterActivationInExitScan - Boolean

No description provided.

ActivateHSU_Events - List WardenObjectiveEventData (nested type)

No description provided.

Survival_TimeToActivate - Single

No description provided.

Survival_TimeToSurvive - Single

No description provided.

Survival_TimerTitle - LocalizedText (nested type)

No description provided.

Survival_TimerToActivateTitle - LocalizedText (nested type)

No description provided.

GatherTerminal_SpawnCount - Int32

No description provided.

GatherTerminal_RequiredCount - Int32

No description provided.

GatherTerminal_Command - String

No description provided.

GatherTerminal_CommandHelp - LocalizedText (nested type)

No description provided.

GatherTerminal_DownloadingText - LocalizedText (nested type)

No description provided.

GatherTerminal_DownloadCompleteText - LocalizedText (nested type)

No description provided.

GatherTerminal_DownloadTime - Single

No description provided.

TimedTerminalSequence_NumberOfRounds - Int32

No description provided.

TimedTerminalSequence_NumberOfTerminals - Int32

No description provided.

TimedTerminalSequence_TimePerRound - Single

No description provided.

TimedTerminalSequence_TimeForConfirmation - Single

No description provided.

TimedTerminalSequence_UseFilterForSourceTerminalPicking - Boolean

No description provided.

TimedTerminalSequence_SourceTerminalWorldEventObjectFilter - String

No description provided.

TimedTerminalSequence_EventsOnSequenceStart - List List WardenObjectiveEventData (nested type)

No description provided.

TimedTerminalSequence_EventsOnSequenceDone - List List WardenObjectiveEventData (nested type)

No description provided.

TimedTerminalSequence_EventsOnSequenceFail - List List WardenObjectiveEventData (nested type)

No description provided.

Additional docs

All expeditions require at least 1 Warden Objective (for Main specifically), which determines if the objective for the level (or one of the layers within the level) is Reactor Startup, Central Generator Cluster and all that.

To begin with, you can find any of the DBs in GameData_WardenObjectiveDatablock.json as your base reference.

At first glance it looks quite intimidating, right? Don’t worry. Let’s do some categorizations and split those fields up. To make it more succinct, I will use one of the datablock copy-pasted from GameData_WardenObjectiveDatablock.json, but remove some redundant parts and add some comments where necessary.

General fields

// The following are common fields used by all objective types.
// Enum that determines what type of the objective is. 
// All objective types are listed above. 
"Type": 6,

// Probably a useless field :)
"Header": "Retrieve Essential Items", 

// Text that describes the objective. Here it’s simply a string, but for most WardenObjective in Rundown 6 it is reference to DB in TextDatablock. 
"MainObjective": "Find the reactor for the floor and make sure it is back online.", 

// Not quite sure… awaiting supplements :)
"WardenObjectiveSpecialUpdateType": 0,

// The following fields are all Text fields 
// that work analogously as "MainObjective".
"FindLocationInfo": 0, 
"FindLocationInfoHelp": 0, 
"GoToZone": 0,
"GoToZoneHelp": 0,
"InZoneFindItem": 0,
"InZoneFindItemHelp": 0,
"SolveItem": 0,
"SolveItemHelp": 0,

// The following Text fields will be displayed upon objective completion. 
// Fields ending with "_Elevator" and "_CustomGeo" are 
// typically  used by Main Objective. If you make the 
// extraction point in the elevator zone, the former ones 
// will be applied, otherwise (implying that you 
// are using forward exit) the latter ones.
// Fields ending with "_ToMainLayer" are typically 
// used by Secondary or Overload. 
// However, for the case of forward exit being set 
// in either Secondary or Overload, 
// I’m not pretty sure… awaiting supplements :)
"GoToWinCondition_Elevator": 0,
"GoToWinConditionHelp_Elevator": 0,
"GoToWinCondition_CustomGeo": 0,
"GoToWinConditionHelp_CustomGeo": 0,
"GoToWinCondition_ToMainLayer": 0,
"GoToWinConditionHelp_ToMainLayer": 0,
"ShowHelpDelay": 180.0,

Waves / Events / Fog / Chained Puzzle fields

These fields tells the objective manager to spawn enemy waves and execute events at given point.

On Elevator Land

Literally on elevator land (upon cage drop). The fields are all self-clarifying.

"WavesOnElevatorLand": [],
"WaveOnElevatorWardenIntel": 0,
"EventsOnElevatorLand": [],

// Firstly used in R4E1, which combos with Tank Error Alarm. 
// This 2 fields could be easily replaced 
// by a "SetFogSettings" Event in "EventsOnElevatorLand"
"FogTransitionDataOnElevatorLand": 0,
"FogTransitionDurationOnElevatorLand": 0.0,

On Activate

At first glance it's rather perplexing that what is "On Activate". Sadly, I have no idea how to describe it clearly ; )

For now, you may refer to its usage in different objective type get some hints. "WavesOnActivate" and "EventsOnActivate" are not used as frequently as "WavesOnGotoWin" and "EventsOnGotoWin"; in addition, the first part, which is the explanation for field "OnActivateOnSolveItem", is quite long. So if you feel hard to understand this part, I suggest you skip this part and read "On Goto Win" first

// The following explanation is copy-pasted from @FlowAria's message in 
// channel "modding-general". I'll do some extension basing on this.
//
// OnActivateOnSolveItem tells ObjectiveManager to trigger EventsOnActivate 
// for each objective item "solved", this include:
// 1. Picking up Objective gather item (Once for each) 
// 2. Retrieve Item (Once for each, have some checkpoint bug)
// 3. Input gather terminal command (Could be triggered as you want per single terminal, buggy)
// 4. Plug powercell to objective generator (Generator Distribution / Generator Cluster)
// 5. Established Uplink (per each terminals)
// 6. Collected DNA from HSU
// 7. Fully finish generator cluster
// 8. Fully startup/shutdown reactor
// 9. Finished Special command objective terminal 
// 
// The followings are my opinions, feel free to correct them if they are wrong.
// -> Considering 4. and 7., you could find that "OnActivateOnSolveItem"
//    works awkwardly on Generator-Cluster. 
//    To my knowledge, Modulation C3 Secondary has taken this into good use, 
//    you may use that as an example.
// -> For 8., by setting the field below "DoNotSolveObjectiveOnReactorComplete",
//    to "false", it is possible that you set multiple Reactors all in the same 
//    layer of the level and trigger different sequences of events upon
//    finishing each startup/shutdown, and finally use 
//    a "ForceWin" event to complete the layer.
"OnActivateOnSolveItem": false,

// "WavesOnActivate" is only used by several objective types. 
// -> Terminal Uplink / Corrupted Uplink 
//    (spawn enemy wave on uplink establishment 
//     and end them on verifications complete)
// -> Special terminal commands 
//    (after the activation scan, spawn enemy waves at given points.)
// -> Survival 
//    (spawn enemy waves at given points.)
// -> Activate HSU 
//    (not sure)
"WavesOnActivate": [],

// If "OnActivateOnSolveItem" is set to "true", refer to the doc above.
// Otherwise, refer to the following.
// "EventsOnActivate" is only used by several objective types.
// -> Special terminal commands 
//    (after the activation scan, execute events at given points.)
// -> Survival 
//    (execute events at given points.)
"EventsOnActivate": [],

// R5B3 Main and R5C2 Overload are good examples for good 
// use of "WavesOnActivate" and "EventsOnActivate"

On Goto Win

By "Goto Win", it means objective completion.

// Stop all waves upon objective completion.
// This can be replaced by a "StopEnemyWave" event 
// in "EventsOnGotoWin"
"StopAllWavesBeforeGotoWin": false,

// For "WaveOnGotoWinTrigger" and "EventsOnGotoWinTrigger",
// they are both enum that acceot the following 2 values. 
// 0 - OnObjectiveCompleted,
// 1 - WhenExitScanMakesProgress
// Note: I'm not sure if "EventsOnGotoWinTrigger" works properly. 
//       Awaiting confirmation :) 
"WavesOnGotoWin": [],
"WaveOnGotoWinTrigger": 0,
"EventsOnGotoWin": [],
"EventsOnGotoWinTrigger": 0,

// Set Fog transition upon objective completion. 
// This can be replaced by a "SetFogSetting" event in "EventsOnGotoWin"
"FogTransitionDataOnGotoWin": 0,
"FogTransitionDurationOnGotoWin": 0.0,

Objective Chained Puzzle

// Used by: 
// -> HSU_CollectDNASample 
// -> Reactor Startup/Shutdown (to initiate their verification sequences)
// -> Special Terminal Command 
// -> Terminal Uplink (after CONNECT, before VERIFY)
// This chained puzzle is usually a Security Scan without alarm,
// but of course, you can make it an alarm if you want :)
"ChainedPuzzleToActive": 0, // typical value: 4, 10

// Used by CentralGeneratorCluster, ReactorShutdown and SpecialTerminalCommand
// This is the chained puzzle the team would be required to complete
// after plugging in all powercell / input shutdown verification code / input special terminal command 
"ChainedPuzzleMidObjective": 0,   

// Extraction scan. If the objective you are editing is 
// not a Main layer objective, and does not require retrieving Big Pickup Item(s)  
// to the extraction scan, feel free to left this field unchanged.
"ChainedPuzzleAtExit": 11, // typical value: 11.

// All vanilla levels use the same extraction scan puzzle.
// So changing the multiplier below could 
// change the extraction scan speed for different levels.
"ChainedPuzzleAtExitScanSpeedMultiplier": 1.0,

Objective-specific fields

The following fields are all Objective Specific. You can remove those irrelevant fields given your objective type.

Some objective types don't have their own objective-specific fields.

Some may require you to spawn certain item(s) in certain zone(s) in LevelLayoutDatablock to make the objective work properly.

3 - Gather Small Item

Objective Type for R6C1 and R6D4.

// Gather Small Item
"Gather_RequiredCount": -1,
// reference to ItemDataBlock
"Gather_ItemId": 133, 
"Gather_SpawnCount": 0,
"Gather_MaxPerZone": 0,

6 - Retrieve Big Item

Objective Type for R6A1 and R6C2 Secondary.

Note: for zones that spawn those Big Pickup Items (no matter if they are objective item or not), don't forget to set "BigPickupDistribution" in LevelLayoutDatablock to "true"

// Retrieve Big Item 
"Retrieve_Items": [ 
  // references to ItemDatablock. 
  133,
  133
],

1/2 - Reactor Startup/Shutdown

Geomorph-tied objective type. To make a Reactor Startup / Shutdown work properly, you must set certain geomorph in the level.

Here's a list of the name of Reactor geomorph (use Ctrl + F in the doc 'All Geomorph' to see what they look like):

Mining Reactor Open HA 1 ****"Assets/AssetPrefabs/Complex/Mining/Geomorphs/geo_64x64_mining_reactor_open_HA_01.prefab"
Mining Reactor HA 2 ****"Assets/AssetPrefabs/Complex/Mining/Geomorphs/geo_64x64_mining_reactor_HA_02.prefab"
Lab Reactor HA 1 ****"Assets/AssetPrefabs/Complex/Tech/Geomorphs/geo_64x64_lab_reactor_HA_01.prefab"
Lab Reactor HA 2 ****"Assets/AssetPrefabs/Complex/Tech/Geomorphs/geo_64x64_lab_reactor_HA_02.prefab"

Note: For Reactor Shutdown, you can only use the Mining Reactor HA 2 as your Reactor Geomorph. Without aid of a plugin, Reactor Shutdown would be broken if using the other 3 geomorphs.

Finally, there's no Floodway Reactor so far.

// -------------------------------------
// Reactor Startup/Shutdown

// Note that if it is Reactor Shutdown, you need to 
// leave at least 1 empty wave data in "ReactorWaves" to make the objective 
// work properly (otherwise there will be 
// no verification code for the shutdown)

// Probably the most complicated, long field. 
// Used by both Reactor Startup and Shutdown.
// For Reactor Shutdown, it's used only for verification code generation.
// This field serves mostly for Reactor Startup.
"ReactorWaves": [
// Array of wave information.
// For conciseness, the example here only contains 1 wave. 
// To create multiple waves, copy-pasted the first wave and edit 
// the fields as needed. 

{ // 1st reactor wave.
    "Warmup": 30.0,        // First Warmup time
    "WarmupFail": 30.0,    // Warmup time if last wave faild to verify
    "Wave": 120.0,         // Defense time
    "Verify": 285.0,       // First Verify time
    "VerifyFail": 60.0,    // Verify time if last wave faild to verify
    
    // Is the code put in other zone? 
    // If set to true, don't forget to spawn a terminal / terminals 
    // in the corresponding zone.
    // 
    // If set to false, the code will be given on the HUD.
    "VerifyInOtherZone": true,
    
    // Works only when "VerifyInOtherZone" is set to true.
    // Specifies the zone to put the code.
    // One of the terminals in the zone will be selected (randomly).
    "ZoneForVerification": 13,
    
    // Defense Wave.
    "EnemyWaves": [
        {
            "WaveSettings": 23,     // reference to SurvivalWaveSettings
                                    // Search the word "Reactor" in SurvivalWaveSettings,
                                    // there are already some wave settings written by 10cc,
                                    // take them into good use.
                                    
            "WavePopulation": 6,    // reference to SurvivalWavePopulation
            
            "SpawnTimeRel": 0.0,    // Spawn time relative.
                                    // The exact spawn time = SpawnTimeRel * Wave
                                       
            "SpawnType": 1        // Enums. 
                                  // 0 - ClosestToReactorNoPlayerBetween
                                  // 1 - InElevatorZone
                                  
                                  // Note: This spawn type can be overriden
                                  // by m_overrideWaveSpawnType in SurvivalWaveSettings.
                                  // This is how flyers are spawned in R6D1 reactor
        }
    ],
    "Events": [
       // For reactor wave events,
       // "Trigger" plays a role in "when to execute this event".
       // It is an enum that accepts the following values:
       // 0 - None
       // 1 - OnStart
       // 2 - OnMid
       // 3 - OnEnd
       // Use the below one as an example, 
       // and don't miss the comments after "Trigger"
        {
            "Trigger": 1, // Executed before wave defense
            "Type": 2,
            "Layer": 0,
            "LocalIndex": 13,
            "Delay": 5.0,
            "WardenIntel": 1369, //"Door to [ZONE_13] unlocked by startup sequence.",
        },
        {
            "Trigger": 2, // Executed after wave defense 
            "Type": 11,
            "Layer": 0,
            "Delay": 12.0,
            "WardenIntel": 1370, //"Auxiliary temrinal located in [ZONE_13]",
            "CustomSubObjectiveHeader": 0,
            "CustomSubObjective": 99999 // "Find the verification code in [ZONE_13]"
        },
        {  
            "Trigger": 3, // Executed after verification for this wave completed.   
            "Type": 11,
            "Layer": 0,
            "LocalIndex": 0,
            "Delay": 0.0,
            "WardenIntel": 0,
            "CustomSubObjectiveHeader": 0,
            "CustomSubObjective": 0
        }
        // Note: For Trigger OnEnd (3) reactor wave events, 
        // They are only executed on host side, which means:
        // It works fine. But, on client side, the Warden Intel
        // for the events won't be displayed. 
    ]
}, // First reactor wave ended
{
// the second reactor wave
},
{
// the third reactor wave
},
// etc...
],

// Determine if the Light is all on upon cage drop. 
// To my knowledge this field is broken in R6 
// - You need to add a “AllLightsOff” 
// in "EventsOnElevatorLand" to make it work as expected
"LightsOnFromBeginning": false, 

// Determine if the Light is all on during 
// when the current wave is in warm-up phase
"LightsOnDuringIntro": false,

// Determine if the Light is all on after startup complete
// when the current wave is in warm-up phase
"LightsOnWhenStartupComplete": false,

// If set to true, the Reactor Startup / Shutdown objective 
// will be deemed un-completed after Startup/Shutdown completed.
// You need to use a ForceObjectiveComplete event
// somewhere in the expedition.
// In Vanilla this field is only used in R6D1, 
// in which the ForceObjectiveComplete event 
// is executed upon boss death
// On the other hand, with "OnActivateOnSolveItem" set to true, 
// you can use "EventsOnActivate" in place of "EventsOnGotoWin"
// Probably you can use this field to create a expedition 
// in which you need to initiate multiple Startup/Shutdown sequences :)
"DoNotSolveObjectiveOnReactorComplete": true,

5 - Special Terminal Command

The most phenomenal use of this objective type is probably R5C2 Overload, in which "WavesOnActivate", "EventsOnActivate", "ChainedPuzzleMidObjective" are all well used.

Also R5B3 Secondary (or Extreme) is an example for how to use this objective type.

// Special Terminal Command
// Surpassed by terminal "UniqueCommands" 
// Awaiting supplements :)
"SpecialTerminalCommand": "",
"SpecialTerminalCommandDesc": "",
"PostCommandOutput": [],
"SpecialCommandRule": 0,

7 - Distribute Powercell

R6C2 Main Objective.

Note:

If you are using this objective type as your Main Layer objective, the required number of powercells will be given in the elevator cargo container.
Otherwise (you are using it as your Secondary/Overload objective), the powercells will spawn in the first zone of the layer. Don't forget to set those zones' "ForceBigpickupDistribution" to "true"
If you don't want the powercell to be given in the elevator cargo, you will need the help of Tweaker, a plugin that enables you to manipulate your elevator cargo.

In addition, you need to spawn the required number of PowerGenerator(s) in LevelLayoutDatablock in the desired zone(s). The objective manager would choose one of the unselected PowerGenerator(s) spawned in the zone as the objective generator.

// The number of powercell to distribute..
"PowerCellsToDistribute": 0,

8/13 - Terminal Uplink / Corrupted Uplink

R6B2 Secondary / R6D2 Secondary

To use this objective types, you need to spawn required number of terminals for each uplink in LevelLayoutDatablock.

Also, for Corrupted Uplink, sadly, for each Uplink, you CAN'T spawn the 2 terminals for the uplink in 2 different zone.

"Uplink_NumberOfVerificationRounds": 0,
"Uplink_NumberOfTerminals": 1,

// Enum that determine wave spawn type.
// Not sure how this field works, 
// To my knowledge: 
// 0 - In the nearby zone (like most sec-door alarm)
// 1 - In the current zone 
//     (which means the current zone should contain 
//      multiple rooms (areas) to make the enemies spawn as expected)
// 
// -> Not sure if the spawn type can be override 
//    by "m_overrideWaveSpawnType" in SurvivalWaveSettings
// Awaiting supplements :)
"Uplink_WaveSpawnType": 1,

9 - Central Generator Cluster

Geomorph-tied objective type (same as Reactor Startup/Shutdown).

Here's a list of the name of valid generator geomorph (in which you can spawn a generator cluster) . Use Ctrl + F in the doc 'All Geomorph' to see what they look like:

Digsite hub HA 1 ****"Assets/AssetPrefabs/Complex/Mining/Geomorphs/Digsite/geo_64x64_mining_dig_site_hub_HA_01.prefab"
Digsite hub HA 2 ****"Assets/AssetPrefabs/Complex/Mining/Geomorphs/Digsite/geo_64x64_mining_dig_site_hub_HA_02.prefab"
Lab hub HA 2 ****"Assets/AssetPrefabs/Complex/Tech/Geomorphs/geo_64x64_tech_lab_hub_HA_02.prefab"
Lab HA 2 [Standard Geomorph] ****"Assets/AssetPrefabs/Complex/Tech/Geomorphs/geo_64x64_tech_lab_HA_02.prefab"
Lab HA 3 [Standard Geomorph] "Assets/AssetPrefabs/Complex/Tech/Geomorphs/geo_64x64_tech_lab_HA_03.prefab"

Note that I've marked the last 2 geomorph with [Standard Geomorph]. If you directly copy-paste them into "CustomGeomorph" in LevelLayoutDatablock, your console will flood with Errors. Without editing ComplexResourceSetDatablock, if you want to use the 2 standard geomorphs, you will need to roll subseed to change the Zone's layout and MarkerSubseed to finally get a Generator Cluster. I suggest you read the 'All Geomorph' doc to find out why.

Oh, finally, in LevelLayoutDatablock, don't forget to set "GeneratorClustersInZone" to 1 in the desired zone.

// Central Generator Cluster 
"CentralPowerGenClustser_NumberOfGenerators": 4,
"CentralPowerGenClustser_NumberOfPowerCells": 4,
// You can change the fog upon plugging in each cell
// This field is not used in Rundown 6. 
// Take the following format as example.
"CentralPowerGenClustser_FogDataSteps": [
    { // Fog changes upon plugging in the 1st powercell
      "m_fogDataId": 80, // reference to FogSettingsDatablock
      "m_transitionToTime": 1.0
    },
    { // Fog changes upon plugging in the 2nd powercell
      // If you don't want the fog to change at this point, 
      // set "m_fogDataId" to the same as the one before. 
      "m_fogDataId": 80, 
      "m_transitionToTime": 1.0
    },
    { // Upon plugging in the 3rd powercell
      "m_fogDataId": 81, 
      "m_transitionToTime": 60.0
    },
    { // Upon plugging in the 4th powercell
      "m_fogDataId": 82, 
      "m_transitionToTime": 360.0
    },
    { // Fog changes upon completing the ChainedPuzzleMidObjective.
      // Awaitng supplement: I'm not sure what would happen 
      //                     if "ChainedPuzzleMidObjective" is 0.
      "m_fogDataId": 83, 
      "m_transitionToTime": 10.0
    }
],

10 - Activate Neonate_HSU / Datasphere. Unseal Hi-Sec Cargo Crate.

Geomorph-tied objective type (same as Reactor Startup/Shutdown).

Here's a list of the name of available geomorph. Use Ctrl + F in the doc 'All Geomorph' to see what they look like:

Lab Dead End Room 1 ****"Assets/AssetPrefabs/Complex/Tech/Geomorphs/geo_64x64_Lab_dead_end_room_02.prefab"
Lab Dead End Room 2 ****"Assets/AssetPrefabs/Complex/Tech/Geomorphs/geo_64x64_Lab_dead_end_room_01.prefab"
Refinery Dead End HA 1 ****"Assets/AssetPrefabs/Complex/Mining/Geomorphs/Refinery/geo_64x64_mining_refinery_dead_end_HA_01.prefab"

// -------------------------------------
// Activate Neonate_HSU / Datasphere. Unseal Hi-Sec cargo crate.
// -> Neonate_HSU (which has 4 variants) and Datasphere are all Big pickup Item. 
// -> Vanilla levels for reference: R3A1, R3B2, R3D1, R4C1, R5B3

// Speaking of that you set Activate Neonate_HSU as you Main layer objective,
// -> "ActivateHSU_ItemFromStart" specifies the Big Pickup item that will be placed 
//    in the elevator cargo container upon cage drop,
// -> "ActivateHSU_ItemAfterActivation" specifies the Big Pickup item will
//    be replaced by another Big Pickup item after it's inserted.
// Both of them are references to ItemDatablock    
"ActivateHSU_ItemFromStart": 0,
"ActivateHSU_ItemAfterActivation": 0,
"ActivateHSU_StopEnemyWavesOnActivation": false,

// Works analogously as "DoNotSolveObjectiveOnReactorComplete".
"ActivateHSU_ObjectiveCompleteAfterInsertion": false,
"ActivateHSU_RequireItemAfterActivationInExitScan": false,
"ActivateHSU_Events": [],

11 - Survival

This type of objective begins upon entering the layer.

For example, if you set the Secondary objective as Survival, the timer won't starts until any of your teammates pace into the Secondary Bulkhead Door.

The objective completes upon the timer ends.

You can end the timer in advance by using a "ForceWin" event.

After the "prepare time" ends, the objective manager will start executing events in "EventsOnActivate", and spawn waves in "WavesOnActivate".

// The time for the players to "get prepared"
"Survival_TimeToActivate": 0.0, 

// The "Timer"
"Survival_TimeToSurvive": 0.0, 

// The titles. You can use either a string or a reference to TextDatablock
"Survival_TimerTitle": "", 
"Survival_TimerToActivateTitle": "",

12 - Gather Terminal

// Gather Terminal (R6D2 Main), works analogously as Gather Small Item. 
"GatherTerminal_SpawnCount": 0, 
"GatherTerminal_RequiredCount": 0, 
"GatherTerminal_Command": "", 
"GatherTerminal_CommandHelp": "", 
"GatherTerminal_DownloadingText": "", 
"GatherTerminal_DownloadCompleteText": "", 
"GatherTerminal_DownloadTime": -1.0,

How to write an Event?

First, let's take a look at an event copy-pasted from the vanilla datablock:

{
    "Trigger": 0,
    
    // set up chained puzzle for a certain command on a terminal
    // can only be used in "UniqueCommands" in LevelLayoutDatablock
    "ChainPuzzle": 0,   
    "UseStaticBioscanPoints": false,
    
    "Type": 0,
    "Layer": 0,
    "DimensionIndex": 0,
    "LocalIndex": 0,
    "Delay": 0.0,
    "Duration": 0.0,
    "ClearDimension": false,
    "WardenIntel": 0,
    "CustomSubObjectiveHeader": 0,
    "CustomSubObjective": 0,
    "SoundID": 0,
    "DialogueID": 0,
    "FogSetting": 0,
    "FogTransitionDuration": 0.0,
    "EnemyWaveData": {
        "WaveSettings": 0,
        "WavePopulation": 0,
        "SpawnDelay": 0.0,
        "TriggerAlarm": false,
        "IntelMessage": 0
    }
}

A bit intimidating, right? Luckily, for a certain event type only few fields are used, which means we can remove unused fields to make our file look cleaner.

Here's a list of EventType:

0 - None
1 - OpenSecurityDoor
2 - UnlockSecurityDoor
3 - AllLightsOff
4 - AllLightsOn
5 - PlaySound
6 - SetFogSetting
7 - DimensionFlashTeam
8 - DimensionWarpTeam
9 - SpawnEnemyWave
10 - StopEnemyWaves
11 - UpdateCustomSubObjective
12 - ForceCompleteObjective
999 - EventBreak

In the following I will try to explain what each event type does, and which fields are used. Also an example is provided for you to refer to and copy-paste.

0 - None

Does nothing. You can use it to display Warden Intel.

{
    "Trigger": 0,
    "Type": 0,
    "LocalIndex": 0,
    "Delay": 0.0,
    "WardenIntel": 1345 // "Door to [ZONE_5] unlocked"
}

1 - OpenSecurityDoor

Open a given Sec-Door, even the door is locked with a security alarm.

Note: Without aid of a plugin, you can't open a sec-door that has already been "approached".

{
    "Trigger": 0,
    "Type": 1,
    "Layer": 1,          // Specify layer in Reality (cannot be in dimension).  
    "DimensionIndex": 0, // Specify dimension if you are unlocking a door in dimension
    "LocalIndex": 2,     // Specify the door to unlock 
    "Delay": 0.0,
    "WardenIntel": 1345 // "Door to [ZONE_2] opened"
}

2 - UnlockSecurityDoor

Works similarly as OpenSecurityDoor.

{
    "Trigger": 0,
    "Type": 2,
    "Layer": 1,          // Specify layer in Reality (cannot be in dimension).  
    "DimensionIndex": 0, // Specify dimension if you are unlocking a door in dimension
    "LocalIndex": 2,     // Specify the door to unlock 
    "Delay": 0.0,
    "WardenIntel": 1345 // "Door to [ZONE_2] unlocked"
}

3 - AllLightsOff

Shutdown all lights in the current level.

{
    "Trigger": 0,
    "Type": 3,
    "Delay": 0.0,
    "WardenIntel": 1345 // "://SUPPROT SYSTEM OFFLINE"
}

4 - AllLightsOn

Turn on all lights in the current level.

{
    "Trigger": 0,
    "Type": 4,
    "Delay": 0.0,
    "WardenIntel": 1345 // "://SUPPROT SYSTEM RESTORED"
}

5 - PlaySound

Play certain sound in/from specific zone. You will need to collect the sound ID from vanilla data.

{
    "Trigger": 0,
    "Type": 5,
    "Layer": 1,
    "DimensionIndex": 0,
    "LocalIndex": 2,
    "Delay": 0.0,
    "WardenIntel": 1345, // "Birther Scream"
    "SoundID": 55555555, // Don't use this as your sound id :)
    "DialogueID": 0 // I'm not sure if this is also used. 
}

6 - SetFogSettings

Changed the fog for the entire level.

{
    "Trigger": 0,
    "Type": 6,
    "Delay": 0.0,
    "FogSetting": 87,
    "WardenIntel": 1345, // "Malfunction in air purification system."
    "FogTransitionDuration": 5400.0
}

7 - DimensionFlashTeam

[Not 100% sure if my explanation is correct. Rectify if anywhere wrong]

Teleport your team to a given dimension, and teleport back after a certain duration.

This event is used in R6A1 and R6C1.

{
    "Trigger": 0,
    "Type": 7,
    "DimensionIndex": 1,     // Dimension to teleport to
    "LocalIndex": 0,
    "Delay": 0.0,
    "Duration": 120.0,       // Teleport back after 120 seconds.
    "ClearDimension": true, // Removed all enemies in the dimension after teleporting back
    "WardenIntel": 1345
}

8 - DimensionWarpTeam

[Not 100% sure if my explanation is correct. Rectify if anywhere wrong]

Teleport your team to a given dimension. You need to execute another "DimensionWarpTeam" event in the dimension to teleport either to another dimension or back to reality.

This event is used in R6D1 and R6D4.

{
    "Trigger": 0,
    "Type": 8,
    "DimensionIndex": 1,     // Dimension to teleport to
    "LocalIndex": 0,
    "Delay": 0.0,
    "ClearDimension": true, // Removed all enemies in previous the dimension
    "WardenIntel": 1345
}

9 - SpawnEnemyWave

Like the name said.

Note: What's the difference between "WardenIntel" and "IntelMessage"?

I'm not pretty sure...

"WardenIntel" display intel message after "Delay" timer ends.

"IntelMessage" won't change [ZONE_4] into actual zone name, and is displayed after "SpawnDelay" timer ends.

{
    "Trigger": 0,
    "Type": 9,
    "Delay": 0.0,
    "WardenIntel": 0,
    "EnemyWaveData": {
        "WaveSettings": 23,
        "WavePopulation": 7,
        "SpawnDelay": 0.0,
        "TriggerAlarm": false,
        "IntelMessage": 0
    }
}

10 - StopEnemyWave

Stop all waves. For example, scout wave, reactor wave, uplink wave... everything.

{
    "Trigger": 0,
    "Type": 10,
    "Delay": 0.0,
    "WardenIntel": 0,
}

11 - UpdateCustomSubObjective

What's "Custom SubObjective"? It's the "[PROGRESSION]" shown in the upper left of your hud, right below the objective description text.

What's the difference between "CustomSubObjectiveHeader" and "CustomSubObjective"? I don't know how to explain this. It is used in R6D3 Overload, which tells you to shutdown the Error alarm in Zone 292.

Note: unlike "WardenIntel", "CustomSubObjectiveHeader" and "CustomSubObjective" only accept reference to datablock. Do not use string.

{    
    "Trigger": 0,
    "Type": 11,
    "Layer": 0,
    "Delay": 0.0,
    "WardenIntel": 0,
    "CustomSubObjectiveHeader": 1344,
    "CustomSubObjective": 1345
}

12 - ForceCompleteObjective

Used in R6D1 to make the Main objective complete after the boss death.

Use "Layer" to specify which layer to force win.

{    
    "Trigger": 0,
    "Type": 12,
    "Layer": 1,
    "Delay": 0.0,
    "WardenIntel": 0
}

999 - EventBreak

Used in "EventsOnActivate"with "OnActivateOnSolveItem" set to true. Split up the event sequence to several parts and execute each on solving objective item.

Take R6C1, R6C2 Main, R6D4 as example.

{    
    "Trigger": 0,
    "Type": 999
}